Wish To Carry Out Your Own Maintenance On Watches? Here Are The Specific Tools You Will Require

By Denver Pinneorsell


Sending watched to be repaired professionally can be a very costly endeavor. Some individuals find it to be more beneficial to buy their own repair tools for watches. It might cost a bit of extra money additionally, however, it will save in the long run. So whether an individual needs to change the watch band, replace a battery, or something a bit more complex, having the right tools handy can make the difference when repairing watches.

Watches are small items; therefore, their inner workings are going to be even smaller. To see inside a watch effectively, individuals need to procure a magnification tool. There is a large variety available, from ones that sit on a table, to hand-held, as well as ones that mimic glasses.

Of course screw drivers will be needed. It is important to locate a screw driver that can work with very small, millimeter sized screws. And individuals will need screws. To find information on how to locate these items, a watch repair shop can be very beneficial.

Sometimes, more than a screw driver is needed. Individuals will need a pair of flat nose pliers because of their flat end. Also required will be a pair of tweezers. The tweezers must have beveled edges but can be made of anything, including plastic or metal. There are magnetic and non-magnetic tweezers. It is advised to get both for watches, just in case.

Never use a screw driver or tweezers to jimmy open the back of a watch. There are tools specially designed to open up watch casings. However, it needs to be noted that there are different tools like this for different models, so be aware. But, if the watches are waterproof, they can easily be opened with watch knife openers.

There is a wide array of additional tools that should be procured to make repairs on watches. Pins are needed to hold together parts of watches and pin pushers are required to remove these pins if necessary. Ball peen hammers are also good at removing pins and rivets. Removing watch hands requires the usage of a hand remover, while hand presses are utilized to replace hands of watches.

Always have the necessary items around for prevention. This usually includes items required to clean watches, such as lubrication oil, grease, and brushes. Many shops dealing in watches will sell cleaning kids. They also sell repair kits which can cost around forty dollars. However, these will not have all the necessary tools and some will need to be purchased separately at higher prices.




About the Author:



Comments (0)

Posting Komentar